Computers Tricks: Tips and Tricks
11 May 2018 - 16:09 * Engineer DS
Modify Your IP Address
How To: Modify Your IP Address In Less Then one
Minute
1. Click on "Start" from the right corner of the
screen. ( Windows 7 )
2. Click on "Run"
3. Type "CMD" in Run Box.
4. Click on OK. You should be now at MSDOS prompt screen. 4. Type "ipconfig /release" (You can copy and
paste it in the CMD) and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My
Network Places" on your desktop.
7. Click on "properties" You should now be on a screen with something
titled "Local Area Connection", or something close
to that, and, if you have a network hooked up, all
of your other networks.
8. Right click on "Local Area Connection" and click
"properties"
9. Double-click on the "Internet Protocol (TCP/IP)
" from the list under the "General" tab
10. Click on "Use the following IP address" under
the "General" tab
11. Create an IP address (It doesn't matter what it
is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in
the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again You should now be back to the "Local Area
Connection" screen.
15. Right-click back on "Local Area Connection"
and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address
automatically"
18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address With a little practice, you can easily get this
process down to 15 seconds. P.S:
This only changes your dynamic IP address, not
your ISP/IP address. If you plan on hacking a
website with this trick be extremely careful,
because if they try a little, they can trace it back.
0 0 0
Comments 0
No comments!
Online: 2 & 14